Stainless Steel 316 / 316H / 316L / 316TI Bolts

DIN 1.4401 / 1.4404 / 1.4571 flange bolts, Double Ended Stud, Plow bolt, countersunk slotted screw. 316Ti threaded rods best price in India, Stainless Steel 316 / 316H / 316L / 316TI Bolts Manufacturers, Stainless Steel 316 / 316H / 316L / 316TI Bolts Suppliers.

Buy Stainless Steel 316L Fasteners, SS 316L Nuts, SS 316L Bolts, SS 316L Screws, Stainless Steel 316 / 316H / 316L / 316TI Bolts Manufacturers in Mumbai, Stainless Steel 316 / 316H / 316L / 316TI Bolts Suppliers in Mumbai, Stainless Steel 316 / 316H / 316L / 316TI Bolts Exporters in Mumbai, Stainless Steel 316 / 316H / 316L / 316TI Bolts Importers in Mumbai.

SS 316L washers for perfect connection & critical applications, excellent pricing and extensive size range of Stainless Steel 316L Fasteners, Stainless Steel 316 / 316H / 316L / 316TI Bolts Manufacturers in India, Stainless Steel 316 / 316H / 316L / 316TI Bolts Suppliers in India.

DIN, ASTM, BS Stainless Steel 316 / 316h / 316l / 316ti Bolts, Stainless Steel Hex Stainless Steel 316 / 316h / 316l / 316ti Bolts, Duplex & Super Duplex Steel Heavy Hex Bolt, Alloy Steel Hex Cap Screw, Stainless Steel 316 / 316h / 316l / 316ti Bolts Manufacturer & Stockist

Chhajed Steel Limited is one of the known providers and makers of SS 316/316H/316L/316Ti Stainless Steel 316/316H/316L/316TI Bolts, where the prime characteristics of these things are usage confirmation and thus it is enormously utilized as a bit of by a wide margin the greater part of the undertakings. Purchase Stainless Steel Stainless Steel 316/316H/316L/316TI Bolts at sensible cost from us Compound 316 Stainless Steel 316/316H/316L/316TI Bolts (Din 1.4401 Stainless Steel 316/316H/316L/316TI Bolts) Stainless Steel UNS S31600 Stainless Steel 316/316H/316L/316TI Bolts is commonly utilized as a bit of sustenance masterminding hardware by and large in chloride circumstances. SS 316 Hex Stainless Steel 316/316H/316L/316TI Bolts is an austenitic nickel-chromium composite including molybdenum. SS 316 Heavy Hex Stainless Steel 316/316H/316L/316TI Boltsis perfect steel for the utilization in marine environments for the reason that of its optimal affirmation from setting breaking down over some other steel grades Composite 316H Stainless Steel 316/316H/316L/316TI Bolts (Din 1.4919 Stainless Steel 316/316H/316L/316TI Bolts) Stainless Steel UNS S31609 Hex Screws is commonly utilized as a bit of Architectural limiting, Laboratory gear, railings and trim, Chemical compartments, Boat fittings, etc. SS 316H Heavy Hex Screws stuns climatic usage, in any case, peacefulness diminishing and oxidizing misrepresentation. SS 316H Socket Cap Screws is an unmatched carbon arrangement of SS 316 affecting the amalgam more to sensible for the utilization in points of confinement where high temp are in intrigue.

stainless-steel-316-316h-316l-bolts

Blend 316L Stainless Steel 316/316H/316L/316TI Bolts (Din 1.4404 Stainless Steel 316/316H/316L/316TI Bolts) Stainless Steel UNS S31603 Countersunk Slotted Screws is everything viewed as utilized as a bit of Marine applications, Pharmaceuticals, and so on. SS 316L Coupler Machine Screws has adaptability and separated at taking from temp. SS 316L Allen Cap Screws is the lower kind of carbon of SS 316 and is in this way shielded from refinement Amalgam 316Ti Stainless Steel 316/316H/316L/316TI Bolts (Din 1.4571 Stainless Steel 316/316H/316L/316TI Bolts) Stainless Steel UNS S31635 Stainless Steel 316/316H/316L/316TI Bolts is commonly utilized as a bit of Heat exchangers, Pulp and Paper Equipment, Propeller shafts, and the sky is the limit starting there. SS 316Ti Square Stainless Steel 316/316H/316L/316TI Bolts gives stretch burst, bendable power and higher crawl at high temp. SS 316Ti Round Head Stainless Steel 316/316H/316L/316TI Bolts joins a little proportion of titanium that is especially just around 0.5 percent.

SS 316 / 316H / 316L BOLT CHEMICAL COMPOSITION

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

316

Min

-

-

-

0

-

16.0

2.00

10.0

-

Max

0.08

2.0

0.75

0.045

0.03

18.0

3.00

14.0

0.10

316L

Min

-

-

-

-

-

16.0

2.00

10.0

-

Max

0.03

2.0

0.75

0.045

0.03

18.0

3.00

14.0

0.10

316H

Min

0.04

0.04

0

-

-

16.0

2.00

10.0

-

max

0.10

0.10

0.75

0.045

0.03

18.0

3.00

14.0

-

STEEL 316 / 316H / 316L BOLTS MECHANICAL PROPERTIES

Grade

Tensile Str
(MPa) min

Yield Str
0.2% Proof
(MPa) min

Elong
(% in 50mm) min

Hardness

Rockwell B (HR B) max

Brinell (HB) max

316

515

205

40

95

217

316L

485

170

40

95

217

316H

515

205

40

95

217

316 / 316H / 316L STAINLESS STEEL BOLT PHYSICAL PROPERTIES

Grade

Density
(kg/m3)

Elastic Modulus
(GPa)

Mean Co-eff of Thermal Expansion (µm/m/°C)

Thermal Conductivity
(W/m.K)

Specific Heat 0-100°C
(J/kg.K)

Elec Resistivity
(nΩ.m)

0-100°C

0-315°C

0-538°C

At 100°C

At 500°C

316/L/H

8000

193

15.9

16.2

17.5

16.3

21.5

500

740

ASTM A193 STAINLESS STEEL 316 / 316H / 316L BOLTS GRADE DESIGNATION

Grade

Density
(kg/m3)

Elastic Modulus
(GPa)

Mean Co-eff of Thermal Expansion (µm/m/°C)

Thermal Conductivity
(W/m.K)

Specific Heat 0-100°C
(J/kg.K)

Elec Resistivity
(nΩ.m)

0-100°C

0-315°C

0-538°C

At 100°C

At 500°C

316/L/H

8000

193

15.9

16.2

17.5

16.3

21.5

500

740

TYPES OF STAINLESS STEEL 316 / 316H / 316L / 316TI BOLTS

Stainless Steel 316Ti hex cap screw

Stainless Steel 316Ti Hex Cap Screw

Stainless Steel 316H Allen Cap Screw

Stainless Steel 316H Allen Cap Screw

Stainless Steel 316L Machine Screw

Stainless Steel 316L Machine Screw

Stainless Steel 316 Carriage Bolt

Stainless Steel 316 Carriage Bolt

Stainless Steel 316H Flange Bolt

Stainless Steel 316H Flange Bolt

Stainless Steel 316L heavy hex bolt

Stainless Steel 316L heavy hex bolt

OTHER TYPES OF STAINLESS STEEL 316 / 316H / 316L / 316TI BOLT

Stainless Steel 316 / 316H / 316L / 316Ti Bolts SS 316 / 316H / 316L / 316Ti Bolt
Stainless Steel 316 Hex Cap Screw SS 316H Hex Screw Supplier
Stainless Steel 316L Socket Cap Screw Exporter 316 SS Countersunk Slotted Screw
ASTM / ASME - A/ SA 193 / 193 Machine Screw SS DIN 1.4401 / 1.4404 Allen Cap Screw Manufacturer
Stainless Steel 316 Square Bolts SS UNS S31600 / S31603 Round Head Bolts
316 Stainless Steel J Bolt Dealer 316Ti SS spring U Bolt Stockist
Stainless Steel 316H Step Bolt SS 316L Hanger Bolt
Stainless Steel 316Ti Draw Bolt SS 316H Plow Bolt Exporter
Stainless Steel 316 Eye Bolt Wholesaler SS 316L Anchor Bolt Distributor
Stainless Steel 316H Shoulder Bolt Supplier SS 316 Set Screw
Stainless Steel 316L Grub Screw SS 316 Machine Bolt Manufacturer
Stainless Steel 316H Stove Bolt ISO Certified SS 316Ti Lag Bolt